Asparagus production for separators 16mm

CNC machined studs with an accuracy of +/- 0.05, which gives an incomparable precision with the asparagus made by the stamping method.

  • They are heat treated to obtain a quality of 10.9.
  • Bichromatic treatment to avoid the deterioration of the piece.
  • Threads: 12x125, 12x150, 14x150 and 14x125.
  • These asparagus will be replaced by the originals, only if a 16mm separator is to be installed.
  • They are not valid for use in vehicles that do not have 16mm spacers installed, except that they are to be used with SYPracing aluminum nuts.
  • Different heights of muleteado, as well as total length of asparagus
Read more

Design, development and production of oil catch tank

SYPracing begins the design, development and production of leftover oil deposits.

  • Made of aluminum 6061 aircraft.
  • Threaded caps with viton gaskets resistant to temperature and oil.
  • Threaded rod to check the oil level comfortably.
  • Reduced weight.
  • Clamps with anti-vibration joints, adjustable in height and degrees to facilitate installation in any vehicle.
  • Material anodized in colors to avoid deterioration.
  • Maximum sealing thanks to its joint system.

The colors are: Red, Blue, Gold and Purple.

Development and production of flywheel separators.

SYPracing begins the design and development of steering wheel spacers for competition.

  • Made of aluminum 6026
  • Measurements: 50mm, 75mm and 100mm.
  • Drills 5.25mm.
  • Weight: 206g (50mm), 234g (75mm) 448.5 (100mm).
  • Lightened by vertical drills.
  • Polished interior to avoid possible damage to wiring.

Colors: Red, Blue, Gold, Purple and Green.

We are working on a prototype of steering wheel shifters imitating the cam shift system.

Below you can see a small gallery in which we announce the new product:

Read more

Nuts of Wheels High Strength Aeronautical Aluminum

SYPracing begins in the design and development of special nuts for wheel fixing in High Strength Aeronautical Aluminum

  • Machined in Aluminum, used in aerospace applications.
  • Thanks to its design and strength of the material allows the use of impact guns for fixing and disassembly.
  • Reduced weight (40% less than original nuts).
  • Designed for fixing with a 19mm glass.
  • Length of the nut 51mm.
  • Threaded entry with guide for easy assembly.
  • Knurled on the outside for easy installation of the same manually.
  • Chemical anodized bath to prevent deterioration.

Initial Colors: Red, Blue, Black, Gold, Purple and Green

Right now we have a lid in process to apply it to the nut with our logo, thus avoiding the internal deterioration of the thread, the asparagus and the nut.

The kit of 16, 20 or 24 nuts is supplied with its nut and corresponding anti-theft cup.

Below you can see a small gallery in which we announce the new product:

Read more

Studs with brake for screw replacement

SypRacing begins the production of asparagus for fixing wheels.

  • We work with treated steel in 10.9 quality.
  • Both ends with threaded guides for greater ease of installation and to avoid the deterioration of the same.
  • Brake integrated in the thread which fixes to the hub of the vehicle.
  • Machined completely in CNC.
  • Treatment in antioxide protective bath.

Will be supplied in set of 16 or 20 units.

The set of 16 or 20 nuts with the corresponding thread pitch is required. 

For more information with the distributor or nearest point of sale.

Read more